WIFI Control. Sync multiple SP108E's together even if the led strips are in Different areas .It only works with 2.4G WIFI network. DON’T use 5G WIFI network. IOS 10/Android 4.4 or later version.If your LED light is 5V,please use 5V power supply.

Wide Compatibility. Support almost LED IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813,SK9822,APA102,WS2818, LPD6803, LPD8806, TM1913, UCS1903, SM16703, DMX512,etc. (DO NOT control 5050RGB or RGBW led strip which has no IC )

Rich Color Modes. 180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness and speed are adjustable.

Capture image’s color you like.The WiFi controller features creative from-image-to-effect function. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room.

User-friendly design. MAX 2048 pixels (Recommand 1500Pixels)in total. Save user setting when power off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot swap protection

Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the APP to calibrate the colors to make them consistent.

Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used, and the WiFi is disconnected . Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED.

Specifications:

Working Temperature: -20~60 Degrees Celsius

Working Voltage: DC5V~24V;

Working Current: 20mA~130mA;

AP Mode Remote Distance: 45FT;

Product Size: 85mm*45mm*22mm;

Product Weight: 40g;

Certificates: CE, RoHS;

Package includes:

1x SP108E WiFi LED controller

1x 3pin female JST connector

1x Mini screwdriver

1x User manual

(Note: power supply/mobile/controller/led strip not include!)

Two Connect Modes

AP (Access Point) mode:

Controller and Phone connect directly, controller works as an access point.

STA (Station) mode:

Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.

Please note:

Sometimes , this controller is pretty hard to use the STA mode . Use another two or three smart phones, all of them install the app and all the phones try the STA mode at the same time .Try more times . It will succeed .The first time is pretty hard , later will be easier .