Music Bluetooth Full Color Controller iOS/Andriod App Control Support Almost All The LED IC Chip Suit

WS2812B WS2811 WS2813 SP107E Music Bluetooth Full Color Controller iOS/Andriod App Control Support Almost All The LED IC Chip Suit for LED Strip,Matrix Panel,Module Buli-in Mic/AUX Input

AUX Input and Built-in microphone.The first mode is 3.5mm audio input.It can block out the outside world . The second mode is the built-in mic. It captured the sound of the outside world. The Sensitivity of two modes can be easily adjusted.If your LED light is 5V,please use 5V power supply.

Suit For led Strip and LED Matrix Panel .Compatible with many LED driver IC except the no IC chip led strip. It is also suitable for many DIY projects.You can set up number of segments and pixels number of each segment according to the LED pixels array of your lights. This feature is perfect for LED matrix. or other DIY project.

30+18+180 Kinds Of Lighting Effect .There are 30 kinds of music lighting effects for LED matrix panel ,18 kinds of music lighting effects for led strip .180 kinds of non-music lighting effects . Music mode and non-music mode can be arbitrarily changed. It can play lighting effect automatically.

Adjustable . The speed , the brightness ,the number of pixels ,color order and the sensitivity are adjustable. When you connect SK6812-RGBW LED , the pure white channel can be adjusted individually.

LED Strip mode: Pixels/SEG max 150pixels .

Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the APP to calibrate the colors to make them consistent.

Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used, and the Bluetooth is disconnected . Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED.

Product Parameter :

Name: DmingLighting SP107E Addressable LED Music Controller

Working voltage: DC5V~24V (voltage depends on the led strip that you use)

Remote distance: 20 Meters

Control up to 960 Pixels

Working temperature : -20℃~60℃

Product size: 85mm*45mm*22mm

Certificates : CE, RoHS

Package List :

1x SP107E music controller

1x 3pin JST connector

1x Female DC connector

1x 1 to 2 Audio cable

1x Mini screw driver

NOTE:

It can support WS2812B and WS2813 but there is no option on the setting page. Please select WS2811 IC chip when you control WS2812B and WS2813 LED strip. When connecting WS2813 LED strip, please connect Bi wire to GND port.

The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V or 24V power supply.

The controller only supports LED lights with smart IC. It can't control ordinary RGB/RGBW LED strip without IC.

Please use a power supply not a battery to power the controller. The output power of power supply must be more than the max power of led light.